February 29, 2024

Cabinet refacing in Santa Ana is an excellent method to update their kitchen without the hassle of a full-blown remodeling job. Besides helping individuals save time and money can also make their cooking area more functional and beautiful.

The cabinet refacing Chino Hills process involves applying veneer to the cabinet’s surfaces and any exposed cupboard ends. The installer removes the old door and drawer fronts, cleans and sands the cabinet boxes’ surfaces, repairs, or fills flaws in the finish to secure a smooth surface for the new cover, and then mounts the new doors, drawer fronts, and hardware.

Self-Adhesive Veneer

The most popular option for refacing is a self-adhesive veneer. It is easy to work with, but individualsmust be careful when determining where to cut the strip and how to place it on the cabinet face. It is vital to align the strip with the stiles and press down firmly on the strip’s entire length until it firmly sticks.

Before removing the paper backing from the veneer strips, apply contact cement to the backs of each one and the cabinet face. Let it dry for a few minutes.

Depending on the type of chosen glue, homeowners need to peel off the release paper on the back of the veneer as they apply it to the cabinet face. Once it is in place, they should utilize a wood block to firmly press down on the strip to force air bubbles out and ensure full adhesion.

Next, trim the excess veneer from the sides of the stiles and rails using a utility knife and a straightedge as a guide. Then use a straightedge to cut the joint between the top and rail veneers at the joint between the two cabinets. This creates a clean, neat joint.

Cut veneer strips to the length a house owner needs to cover the long horizontal rails on lower refacing cabinets. These strips will finish the outer edges of the cabinet stiles and the drawer rails on the bottom refacing cabinets.

Once they have applied the veneer strips to the cabinet stiles, cut pieces of veneer that will cover the inside edges of the cabinet doors and drawer openings. It would be best if individuals did all the cabinet’s inside edges’ doors first, then the drawers’ top and bottom inside edges.

Although a DIY kitchen cabinet refacing project is possible, it is highly recommended to still rely on an expert. They will know the proper way of choosing the material with the best possible quality that will fit their budget.

Furthermore, it is also essential for house ownersto have an awareness ofall the advantages and disadvantages of cabinet refacing using veneers. Learn more about them in the infographic below created and designed by Kitchen Cabinet Refacing:

Cabinet-Refacing-Veneer-Good-or-Bad

Leave a Reply

Your email address will not be published. Required fields are marked *